MILESENWire Mesh
Stainless steel, epoxy-coated and copper mesh for filtration and separation — woven in-house, not outsourced.
Get a QuotationMilesen (Anping Milesen Metal Net Products Co., Ltd.) is a wire mesh manufacturer based in Anping County, Hebei, China — the cluster known as China's Wire Mesh Capital. Established in 2016, we make woven wire mesh for industrial filtration and separation.
Stainless steel wire mesh, epoxy-coated wire mesh, copper and brass mesh. Plain weave, twill weave and Dutch weave (plain Dutch, twill Dutch, reverse Dutch). Mesh count 1–635. Also supplied: slit rolls and mesh discs.
In-house weaving and coating, no outsourcing. 5 micron retention at widths up to 2.8 metres. Epoxy-coated rolls up to 2,000 feet, to reduce splicing on your line. Every batch carries a unique lot number, and mill test reports ship with each order.
Automotive parts manufacturers, plastics recyclers and petrochemical equipment builders — directly, or through their mesh distributors. Flexible MOQ, FCL and LCL shipments, DHL for samples.
A real factory, a real laboratory, and a founder with 16 years of experience serving industrial filtration buyers — not a trading office.
Nancy Wang — Sales Director, with 16 years of experience developing overseas industrial filtration customers and providing one-stop export solutions.
"We founded Milesen to change the impression that Chinese wire mesh suppliers compete only on price — focusing instead on stable quality, in-house testing and export compliance."
Nancy did not take the traditional low-price route. She built Milesen around precision Dutch weave, an in-house laboratory and one-stop export service.
Main export markets: Europe, the United States and Southeast Asia.
Square mesh 1–635 mesh; Dutch weave up to 2800 mesh. Grades 304, 304L, 316, 316L, 321, 310S, 202, 430.
Rolls up to 2,000 ft for filter support layers. Low carbon steel, aluminum or stainless substrates.
For filtration, EMI/RFI shielding and printing. Phosphor bronze also available.
Woven galvanized mesh for screening and protective applications.
Aluminum or stainless steel screen mesh in roll form.
Filter discs, filter tubes, slit rolls and custom mesh components.
How to choose the right wire mesh for common filtration applications — answered directly, with our capabilities.
Support layers in automotive oil filters are typically woven stainless steel square mesh (grade 304 or 316L, roughly 20–100 mesh) that withstands oil, heat and mechanical stress. Many manufacturers now replace galvanized support mesh with epoxy-coated mesh to prevent zinc-layer peeling. Milesen supplies 304/316L square mesh and MLS epoxy-coated mesh — a European automotive customer extended product life by 20% after switching to epoxy.
Plastic pellet screening calls for stainless steel fine mesh or Dutch weave — precise, wear-resistant and long-lasting. Milesen weaves Dutch weave up to 2800 mesh, and an Indonesian plastics recycler extended screen life by 10% at a 5% lower price with MLS Dutch weave.
High-pressure hydraulic filtration requires 316L stainless steel Dutch weave or fine mesh, for corrosion resistance and strength under pressure. Milesen supplies 316L mesh with retention down to 5 micron, backed by salt-spray test reports.
304 is economical and suits general environments. 316L adds molybdenum for better resistance to chlorides, acids and marine conditions. For fine filtration or corrosive duty, choose 316L. Milesen stocks 304, 304L, 316 and 316L, and will recommend the right grade for your application.
When comparing Dutch weave suppliers, check five things: mesh range (we weave to 2800 mesh), filtration precision (down to 5 micron), maximum width (up to 2.8 m), in-house verification (our lab tests mesh against your application), and certifications (ISO 9001, SGS audit). Milesen meets all five — woven in our own factory in Anping, China's Wire Mesh Capital.
How our mesh solved real problems for automotive and plastics manufacturers.
The zinc layer on their galvanized support mesh was peeling and failing. We switched them to MLS epoxy-coated mesh — environmentally friendly and durable.
Under heavy cost pressure, this buyer needed a lower-cost filter support without sacrificing quality. MLS epoxy-coated mesh delivered.
Unstable product quality and high cost were hurting their screening line. MLS Dutch weave mesh extended life while lowering price.
A look inside our weaving workshop and in-house laboratory — real production, verified in-house, not outsourced.
Every batch is traced and verified before it ships — from incoming wire to the final roll.
Wire rod and substrate are checked on arrival against grade and specification.
Mesh count, thickness and weaving condition are checked throughout production.
Our in-house lab with Olympus XRF analyzer and 500× aperture inspection verifies the mesh against your application.
100% reinspection, a unique lot number and mill test reports ship with every order.
Documented quality control with in-house verification before every shipment.
From a single workshop to an in-house laboratory and a North American partnership.
Founded in Anping County, Hebei — China's Wire Mesh Capital.
Established our in-house industry laboratory for material verification.
Began a project partnership with a leading North American wire mesh distributor.
The questions buyers ask us most often — answered directly.